Battery Pack
Power Your Home & Solar System With Second-Life EV Batteries.
Retail domestic solar batteries cost £285 to £600+ per kWh. Automotive-grade lithium modules from low-mileage UK salvage EVs cost just £65 to £125 per kWh. Use our interactive 48V module calculator, wiring reference, and UK hardware price comparison below.
Calculate Modules Needed & Smart Tariff Payback
Pick your donor EV module and target kWh capacity to see the exact module count, upfront savings vs. new retail racks, and annual savings charging overnight on a 7p/kWh EV tariff:
Will This EV Module Work With My 48V Inverter?
Select your solar inverter and target salvage EV module to check exact series wiring, safe min/bulk/float cutoffs, compatible BMS, and Class-T DC fuse sizing:
Select an inverter and EV module above to calculate exact voltage cutoffs and wiring configuration.
48V Low-Voltage Modular Banks (LV DC)
Individual sub-modules are unbolted from a donor EV battery pack and wired in series/parallel to sit within the standard 44V–57V DC ("48V Nominal") window used by UK off-grid and hybrid inverters (Victron MultiPlus-II, Sunsynk ECCO, and Solis).
- Safer Touch Voltage: Staying under 60V DC classifies as Extra-Low Voltage (ELV), avoiding 400V DC arc-flash hazards.
- Easy BMS Pairing: Pairs directly with an aftermarket Smart Active-Balance BMS (e.g., SimpBMS or JK BMS 200A CAN).
Full 350V–400V Pack + CANbus Emulator
Instead of opening the battery casing, a complete, sealed EV pack (such as a Nissan Leaf 24/30/40/62kWh, BMW i3, or Hyundai Kona pack) is placed in an outbuilding and connected to a High-Voltage Hybrid Solar Inverter (Fronius Symo GEN24, Sungrow, or Solax).
- Open-Source CANbus Bridge: A LilyGo ESP32 CANbus board (running Dala's Battery-Emulator) translates the car's BMS messages so the solar inverter recognizes it as a standard HV storage bank.
- Factory Safety Intact: Retains the car's original contactors, pyro-fuses, and OEM cell monitoring.
Best UK EV Battery Modules for 48V Home Solar & Off-Grid Systems
VW ID.3 / ID.4 / Enyaq (MEB 12s)
6.85 kWh48V Wiring: 1 Module = 48V Ready! Wire multiple 12s modules in parallel for 13.7kWh / 20.5kWh.
BMW i3 (60Ah / 94Ah / 120Ah)
2.7 – 5.2 kWh48V Wiring: 1 Module = 48V Ready! Rugged aluminum frame; top choice for Victron 12s (44.4V) settings.
Tesla Model S / X (85/90/100D)
5.3 kWh48V Wiring: 2 Modules in Series = 44.4V (12s) 10.6kWh, or 1 module for a 24V campervan/marine bank.
Nissan Leaf Gen 2 (ZE1 40kWh)
1.67 kWh48V Wiring: 3 Modules in Series = 43.8V (12s), or 4 Modules in Series = 58.4V (16s).
Nissan Leaf Gen 1 (24kWh Blade)
0.5 kWh48V Wiring: 6 Blades in Series = 45V (12s), or 7 Blades in Series = 52.5V (14s).
Jaguar I-Pace EV400 (90kWh)
2.5 kWh48V Wiring: 4 Modules in Series = 44.4V (12s) 10.0kWh bank.
| Donor EV Module | Cell Config | Nominal Voltage | kWh / Module | How to Wire for a 48V Solar Inverter |
|---|---|---|---|---|
| VW ID.3 / ID.4 / Enyaq (MEB 12s) | 12s2p / 12s3p | 44.4V (36V–50.4V) | 6.85 kWh | 1 Module = 48V Ready! Wire multiple 12s modules in parallel for 13.7kWh / 20.5kWh. |
| BMW i3 (60Ah / 94Ah / 120Ah) | 12s1p Prismatic | 44.4V (36V–50.4V) | 2.7 – 5.2 kWh | 1 Module = 48V Ready! Rugged aluminum frame; top choice for Victron 12s (44.4V) settings. |
| Tesla Model S / X (85/90/100D) | 6s74p (18650) | 22.2V (18V–25.2V) | 5.3 kWh | 2 Modules in Series = 44.4V (12s) 10.6kWh, or 1 module for a 24V campervan/marine bank. |
| Nissan Leaf Gen 2 (ZE1 40kWh) | 4s2p (8-Cell) | 14.6V (12V–16.8V) | 1.67 kWh | 3 Modules in Series = 43.8V (12s), or 4 Modules in Series = 58.4V (16s). |
| Nissan Leaf Gen 1 (24kWh Blade) | 2s2p (4-Cell) | 7.5V (6V–8.4V) | 0.5 kWh | 6 Blades in Series = 45V (12s), or 7 Blades in Series = 52.5V (14s). |
| Jaguar I-Pace EV400 (90kWh) | 3s4p Pouch | 11.1V (9V–12.6V) | 2.5 kWh | 4 Modules in Series = 44.4V (12s) 10.0kWh bank. |
Compare Prices: Inverters, Active BMS & Safety Hardware
Automatic background price comparison across UK Off-Grid Specialists, eBay UK, and Amazon UK:
Victron MultiPlus-II 48/5000/70-50 230V Inverter Charger
G98/G99 UK Grid-Compliant • 4000W continuous output • Supports custom 12s (44.4V) & 14s/16s EV module voltage cutoffs.
Sunsynk 5kW Hybrid Dual-MPPT 48V Solar Inverter
Dual MPPT Solar Inputs • Works seamlessly with 48V EV module banks & CANbus BMS protocols.
JK Smart Active Balance BMS (Model: JK-B2A24S20P — 8S to 24S 200A CAN)
2A Active Capacitive Balancing • Bluetooth App + CAN/RS485 inverter comms for NMC & LFP EV modules.
LILYGO T-CAN485 ESP32 CANbus Board (For Dala Battery-Emulator)
Lets a complete Nissan Leaf, BMW i3, or Kona HV battery talk directly to Fronius/Sungrow/Solax HV inverters.
Class-T High-Interrupt DC Fuse Holder (BEP 225–400A / Blue Sea)
Mandatory arc-extinguishing DC fuse protection for lithium EV battery banks with high short-circuit current.
500A / 50mV Battery Monitor Shunt (Victron SmartShunt 500A vs Renogy)
Tracks exact State of Charge (SoC%), kWh drawn, and voltage down to 0.01V for 48V solar battery banks.
Live Solar-Ready Modules & Battery Packs (1)
Battery Pack